This month’s block is challenging only in its size – tiny 1.5in squares! There is no PDF for this block as its all pieced construction. 🙂

So in order to make this block pick out one of the three colours (pink, blue or green), some of the beige background fabric and a contrasting colour to the main colour you picked 9 (try not to pick a blue as the sashing for the quilt is blue).

Let’s get started!

Cutting ~

– from the beige background fabric cut two 1.5in strips and crosscut 31, 1.5in squares

– from the selection of coloured fabrics cut 50, 1.5in squares (I chose the pink so I cut 10 squares from one fabric and 8 squares from each of the remaining five prints – divide 50 by the amount of fabrics you have or juggle the numbers like I did)

– from your contrasting fabric cut one, 2in strip, crosscut this strip into 2 x 9in strips and then cut the remaining piece in half

NOTE: The border strip is cut larger than it needs to be – this is so we can reduce the warping when such a narrow piece is stitch on and pressed. It will be trimmed down to the correct size at the end.

Assembly ~

Lay out your squares next to your machine so you can stitch and return them to position (so you can keep track). I also suggest taking a photo of the block once you’ve settled on your placement just in case you mix up some squares and need reference. Accuracy is a must and you need to make sure your squares are 1.5in and you are using a 1/4in foot on your machine.

Lay out the 1.5in squares as shown – mix up our coloured squares to whatever suits you.

Stitch the squares together in pairs working your way through the whole block (don’t worry about the 9th square in a row he gets attached later). Then go back through the rows and piece two pairs together (still leaving square #9 out), then once again going through the rows piece the four-square sections together. Finally come back through and stitch that lonely little 9th square onto the end of each row.

NOTE: I chain pieced this entire block because in my head I knew what square was where – you can chain piece as I have done BUT if you do this method please make sure you take a reference photo to help with the layout as it can get confusing.

Layout and check your block – check the colour placement and overall design.

Once all the rows have been pieced press the seams in alternating directions – see photo below.

alternating seams

Then carefully nest the seams as shown in the next photo, pin them and then stitch the rows together. Go slowly as you need every point to line up as best you can to help create the pixellated image.

Press the entire block and trim any edges that may need it.

Press and trim block.

Lastly attach your side border, press the seams and then attach the upper and lower borders.

Attach borders and press seams.

Trim the border down to 1in from the seam line. then pop this block with the other three blocks.

Trim and press.

We are now a quarter of the way through the BOM. 🙂

If anyone who follows this blog is looking for some beading supplies on the cheap please head over to www.hand-made.com.au/FrankensteinsFabrics I’m having a destash of some bits and pieces.

This is going to sound a tad crazy but this year Mum and I made it our personal challenge to see how long we could go without putting the heater on at home… well its the 25th today and Dad of all people (Mr I don’t feel the cold) asked for the heater to be put on.

So I’m not sure how that turned out as I left for the shop but we’ll see what’s happened when I get home this evening.

Meanwhile I have the heater on in the shop because this morning I wasn’t feeling 100% and I’m catching up on some instruction writing and sitting behind a computer typing makes for very cold feet and hands.

Over the coming weeks there is so much stuff happening that I feel a little daunted by the load but most of it can be sorted if I work to a plan, but as we all know the best plans go astray with the greatest of ease…. not sure what I can do about it really but I think it will be ok. Just pick one thing at a time and focus on that. 🙂

Our next market will be the 31st of August at the Scholastic Stadium, Duffys Road Terrigal with the Handmade Craft Market. It’s the market’s 3rd birthday so I will have some cute things for sale to celebrate. 🙂

If anyone is looking for a custom quilt order or machine quilting please see the relevant tabs at the top of the home page.

There’s only 3 days left of the sale – go to the STORE tab, start shopping and when you get to the checkout enter SS30 in the coupon box to receive your 30% off!

Oh – and just a reminder that the shop is only open this Friday from 9am – 12pm.

Stay warm, keep stitching!

Marni x

I’ve just uploaded my very first PDF pattern to craftsy.com so excited!

Last week at the Craft and Quilt Show at Darling Harbour’s Convention Centre was a terrific chance for everyone to dive into crafts old and new, before the show is moved to its new location next year while the convention centre is renovated/rebuilt.

I was working with my friend Hans on his stand Know-How Sewing Essentials. Due to dad’s illness I was unable to attend as a stallholder myself, but as I have one of Hans’ Nolting machines in my shop for machine quilting I was able to lend a hand and demonstrate on the stand for the week. I always love the hive of activity of a craft show – I’ve been to so many over the years in all of my various roles that they do all blend together but each show has its own unique atmosphere – mainly due to the locals who attend – NSW feels quite frantically paced compared to a SA show but what always remains the same is the love and enthusiasm we all have for this craft of ours. And that’s really the most important thing.

I met all sorts of quilters at the show – some just starting out, some who’ve quilted for years – some who were learning at school and some who hadn’t quite decided which way they wanted to take their quilting skills.

I had a great time at the show – I always do – catching up with all of my industry friends, sneaking in a little bit of shopping (did someone say Washi tape?) and working hard to make sure that all our customers walked away happy, more knowledgeable and ready to tackle their next project.

Recovering from the show takes a few days though – my feet all the way up to my hips are not forgiving me for what I’ve put them through but after a lazy day at home with Dad yesterday am feeling much more like myself. 🙂

Still I wouldn’t change it for the world.

This week apart from scheduled classes I am working on more magazine submissions and a few of my own personal craft things as well as more updating to the website and writing more patterns.

The sale is still on until the 27th of June – simply select all of your products and proceed through the shopping cart, when prompted enter SS30 to receive 30% off everything (Excludes wadding, machine quilting and machine servicing, class fees, pre-made quilts, selected kits and gift vouchers). Postage is also not included in the discount.

I’m also up to no good – planning a few things for the shop’s 2nd birthday which will be upon us very shortly and I simply cannot believe how time has flown.

Stay warm, keep stitching and have a lovely week.

Marni x

At the moment in the shop I have been head down bum up making new projects for the shop and for magazine publication.

I’ve been finishing off a few random things, working on new patterns and machine quilting. A friend of mine got married last week and we had a great time celebrating with her and her new hubby. 🙂

Busy little bee aren’t I?

Next week is the big Craft & Quilt Show at Darling Harbour Convention Centre – I’m down there doing a few odd things this year, but won’t be there as a stallholder. The shop will be closed from Wednesday 12th until the following weeks normal trading.

Anyways, back to Criminal Minds and my tea and doughnuts.

Marni x

Afternoon all,

Here we are at block #3 of the Block of the Month.

Block #2 was emailed out as the beginning of last month was very hectic indeed. But you can get it here.

Block #3 is a sweet little bird, get the PDF here.

To make block #3 you need to use the same techniques as used in blocks #1 and #2 then continue as follows…

Note: Depending on which way you want your bird to face – facing left trace right side up, facing right trace from wrong side of template.

When stitching the beak as it is such a tiny appliqué shape make sure you set your zigzag stitch on your machine smaller. Also when cutting it out sometimes it helps to add a little extra to the edge that will sit underneath the bird’s body.

After you have stitched around the body, wing, beak and tail pieces tear away the stitch-n-tear from the back of the block. Place the block back over the template and trace the tail/feathers, head swirl and eye with a removable marking pen. I have used a Frixion iron away pen in orange.

Thread your hand needle with two strands of DMC thread (whatever colour you want) and back-stitch the tail feather centre lines and the bird’s eye. Lazy-Daisy stitch the feathers on the tail in a second colour. Pick a third colour and back-stitch the head swirl.

For those who need a reminder of the stitches used, click here for a link to a free downloadable guide to embroidery stitches.

I’ll upload a photo of the finished block in the morning as I’m just putting the finishing touches on my little bird and need to take some pictures in better light.

Marni x

EDIT***

Here is the photo of the finished block. I added a few French Knots along the edge of the head swirl because I felt this little bird needed a bit more of a flourish.

Welcome to the very first block of the month at Frankenstein’s Fabrics.

This project is scheduled to finish up at the end of the year – with each block being posted here on the FF blog with a link for you to download the patterns as a PDF or if you have previously let me know the PDFs will be emailed to you.  I will post the tutorial here at the beginning of each month.

I will be making this quilt with you so the final result will be a mystery to us all and that makes it more exciting. 🙂

So here we go with Block 1

Love….

I’m starting you off with the easiest of the 7 appliquéd blocks. They have straightforward shapes and you can do as many or as few of the embellishment options as you like.

In your kit you will have all of the fabrics for the entire quilt (except for backing and wadding). The only fabrics that I have dictated are the border, binding, sashing and background. You have 20cm of each of all of the other fabrics, some vliesofix, stitch-n-tear, 6-stranded embroidery floss and some small rickrack. The 20cm pieces of fabric will allow you to select what fabrics you want for each block which means no two quilts will be the same. Below is a basic materials list – there may be things that I add as we go along, but not many.

Materials List

• Pencil
• Paper and fabric scissors
• Lightbox or window
• Teflon mat (or baking paper)
• Small hand needle
• Iron and ironing board
• Rotary cutter, ruler and mat
• Microtex machine needle – size 60/8 or Universal 70/10 (used for appliques)
• Universal machine needle – size 80/12 (used for quilt assembly)
• BOM fabric kit
• Matching threads – machine embroidery, cotton threads
• Lighter or candle or fray stop (optional)

Before you start…

I must stress you need to be accurate. If you do not have the tools (rotary cutter, ruler and mat) please borrow from a fellow patchworker or use a pencil and mark on the wrong side of the fabric the squares you need to cut out and then use good fabric scissors. Cut slowly and carefully.

Please read through the instructions carefully before you begin. See notes at the bottom for extra tips that will help you as you sew.

Cutting –

From the background fabric cut two 10.5in strips. Cut the selvedges off and crosscut from each strip four 10.5in squares (you only need seven but always good to have a spare). See photos 1-4.

Photo 1: Line up your background fabric on your cutting board.

Cut two 10.5in strips.

Cut the selvedge off.

Crosscut 10.5in squares across the strips (you’ll get 4 per strip).

Appliqués

Choose four fabrics from your kit.  Press these and set aside for the moment.

Print off the LOVE PDF here.

Trace the letter onto the smooth side of the Vliesofix. See photos 5 and 6.

Photo 5: Place the LOVE template on your lightbox or window.

Photo 6: Trace the letters onto the paper side of the Vliesofix. Leave approximately 1/2in between shapes.

Cut the letters out roughly with paper scissors leaving a 1/2in gap between them.

Photo 7: Cut out the shapes roughly with paper scissors.

On your ironing board lay out one of your chosen fabrics right side down. Choose which letter will be that fabric, lay the letter rough side down onto the fabric and press with a hot dry iron. Repeat with all four letters.

Photo 8: Using a hot dry iron (no steam) press the rough side of the Vliesofix to the wrong side of your chosen fabrics (one letter per fabric).

Allow the fabrics to cool and cut out the letters with fabric scissors on the pencil line. Put them aside.

Photo 9: Cut out the letters carefully on the pencil lines with fabric scissors.

Take your 10.5in square of background fabric and fold it in half twice and press to find the centre of the block. Open the block and lay it out right side up on your ironing board.

Photo 10: Fold your 10.5in square in half and press.

Photo 11: Fold the 10.5in square in half a second time and press.

Photo 12: Open the square to reveal the fold lines and the centre of your block.

Peel the paper backing off the letters and place them onto the block – work out your placement using the fold lines.

Photo 13: Peel the paper backing off the letters.

Optional: Choose two letters (preferably letters with straight sides) and trim rickrack to fit. To prevent the rickrack from fraying use a small amount of fray stop or melt the ends with a flame. Place rickrack under the edge so it is just peeking out, then press all the letters into place with the iron.

Photo 14: Lay out your letters, evenly spaced from the centre of the block.

Photo 15: (Optional) Choose two letters (preferably letters with straight sides) and trim rickrack to fit. Place rickrack under the edge so it is just peeking out, then press all the letters into place with the iron.

If you aren’t going to use the rickrack press the letters in place when you are happy with their positions.

Take a square of Stitch-N-Tear the same size as your block and pin it to the back of the block.

Photo 16: Take a square of Stitch-N-Tear and pin to the back of your block.

Set up your machine with the open-toe embroidery foot, neutral bobbin thread (white, grey, beige etc) and the thread that matches your first shape.

Photo 17: Set up your machine with a small zigzag stitch and an open-toe embroidery foot.

Photo 18: Choose threads to suit your chosen fabrics. I have used Rayon Machine Embroidery threads because I like the shine.

NOTE: This bit you are on your own a little as I don’t know what machines you all have or what the stitches look like.  You will need a test piece to help you find a stitch that you like. If you have trouble please email me a photo of your machine’s control panel so I can advise you which way to go.

I have a Janome MC4000. I use Rasant thread in my bobbin. I set my zigzag (which is stitch 14 on my list) to a stitch width of 2.0 and a length of 0.2. This means that my stitches are wide enough to cover the edges of my appliqués and that the stitches are close enough together to not show any fabric through the gaps.

Photos 19 – 27: Follow the captions on each photo in conjunction with what the photo shows you. This technique will be used throughout the BOM and will only be shown here in this first part. In each successive blog I will refer back to this section of photos. Feel free to save this part to your computer for quick reference.

When doing round shapes – stitch a few stitches and then stop with the needle on the right. You will start to see the edge of the shape curve away from the centre of the foot. When that happens stop, lift the foot and turn your work a fraction – see video for how to pivot. You are turning your work, you are adjusting it a tiny fraction to ensure that the stitches are at a 90deree angle to the raw edge of the appliqué shape.

Photo 28: When doing round shapes – stitch a few stitches and then stop with the needle on the right. Lift the foot and turn your work a fraction – see video for how to pivot.

When stitching pointy sections – finish your edge as normal, leave the needle down on the right side and lift the foot. Turn your work 90degrees, foot down and make 2-3 stitches. This will bring you in line with the other edge. Needle down on the right, lift the foot and turn your work, lining up the next edge. Foot down and continue stitching.

Photo 29: Finish your edge as normal, leave the needle down on the right side and lift the foot. Turn your work 90degrees, foot down and make 2-3 stitches. This will bring you in line with the other edge.

Photo 30: Needle down on the right, lift the foot and turn your work, lining up the next edge.

When stitching an internal point – stitch all the way along the edge prior to the point, leave the needle down on the right, lift the foot and turn your work so the needle is parallel to the point. Put the foot down and make 2-3 stitches in the centre of the point. Leave the needle down, lift the foot and turn your work, lining up the next edge.

Photo 31: Stitch all the way along the edge prior to the point, leave the needle down on the right, lift the foot and turn your work so the needle is parallel to the point. Put the foot down and make 2-3 stitches in the centre of the point. Leave the needle down on the right side, lift the foot and turn your work, lining up the next edge.

Once you’ve finished stitching all of your applique shapes and tying off the threads, turn your block over and start to remove the Stitch-N-Tear. Support the stitches with your fingers and gently tear away the Stitch-N-Tear – it has been perforated by the stitches so it doesn’t need cutting.

Photo 32: Once you’ve finished stitching all of your applique shapes and tying off the threads, turn your block over and start to remove the Stitch-N-Tear.

Photo 33: The Stitch-N-Tear has been perforated by the stitches so it doesn’t need cutting.

Photo 34: Support the stitches with your fingers and gently tear away the Stitch-N-Tear.

If you are going to embellish your appliques with some embroidery remove all of the Stitch-N-Tear.

Photo 35: If you are going to embellish your appliques with some embroidery remove all of the Stitch-N-Tear.

Embellish as you please. Here is a link to the Embroiderers’ Guild and a list of stitches and how to do them.

Press your block and put aside in a flat space until we are ready to assemble the quilt.

Notes:

Ironing temperatures –

• Your standard cotton fabrics will need to be ironed on the highest setting with steam (or spray with water as you iron).
• Vliesofix needs to be ironed with a hot but dry iron. Steam will cause the Vliesofix to bubble, buckle and pucker.
• When pressing blocks when you are finished stitching the appliques use a pressing cloth (another piece of fabric or a Teflon mat) to protect the threads (Rayon threads can melt at the high temperatures that cotton needs to be pressed with).

That brings us to the end of Block 1 – please feel free to send me photos of your finished blocks.

 Marni x

If you have come to this website looking for the fabrics you have seen advertised in the product review sections of the following magazines – Australian Patchwork & Quilting, Patchwork & Stitching and Handmade – could you please ring through your order to me at the shop. This website is currently under development.

All you need to do is quote the name of the range when you ring so I can help with your order.

Thank you!

Marni